IBM i2 Enterprise Insight Analysis Videos

IBM i2 Enterprise Insight Analysis Videos Courses:

IBM i2 Analyze Connector Creator - The library element

This is the eighth video in a series which walks you through the build of your first i2 Analyze connector creator configuration file.

This video provides details how to set up the library element.

To view the previous videos in this series, go to Additional Resources below for the links.

Duration

3 minutes


Install i2 Enteprise Insight Analysis from an archive file

In this course, you will learn how to install i2 Enterprise Insight Analysis by extracting an archive file.

With this installation type, you do not need to install IBM Installation Manager on the server that you install i2 Enterprise Insight Analysis. This can be useful when you are installing and deploying the Enterprise Insight Analysis on multiple servers, or on a server without a graphical user interface.

Duration: 20 minutes

IBM i2 Analyze Connector Creator - Adding an external datasource

This is the seventh video in a series which walks you through the build of your first i2 Analyze connector creator configuration file.

This video provides details on how to add an external datasource.

To view the previous and next video in this series, go to Additional Resources below for the links.

Duration

3 minutes


i2 Analyze Connector Creator - Installing the Connector Creator

This is the sixth video in a series which walks you through the build of your first i2 Analyze connector creator configuration file.

This video provides details on how to install the connector creator.

To view the previous video in this series, go to Additional Resources below for the links.

Duration

7 minutes


i2 Analyze Connector Creator - The i2 Analyze Schema

This is the fourth video in a series which walks you through the build of your first i2 Analyze connector creator configuration file.

This video provides information on the i2 Analyze schema which you will use.

To view the previous video in this series, go to Additional Resources below for the links.

Duration

14 minutes


i2 Analyze Connector Creator - The environment

This is the third video in a series which walks you through the build of your first i2 Analyze connector creator configuration file.

This video goes over the environment you will use to build the connector creator configuration file.

To view the previous or next video in this series, go to Additional Resources below for the links.

Duration

4 minutes

i2 Analyze Connector Creator - The Source Database

This video is the second part in this series which shows you how to build your first i2 Analyze connector creator configuration file.

This video looks at the external source data we will be working with to create a simple first deployment for an i2 Analyze connector.

To view the previous or next videos in this series, go to Additional Resources for the links.

Duration

4 minutes


i2 Analyze Connector Creator - The result after building the new configuration file

This is the 21st and final video in a series that walks you through the build of your first i2 Analyze connector creator configuration file.

This video provides details on how you can check your new configuration in the Intelligence Portal.

To view the previous and the next video in this series, go to Additional Resources below for the links.


i2 Analyze Connector Creator Guide

As part of an IBM i2 Analyze deployment, Connector Creator provides a way to access some types of external data sources without the need to write a custom data connector.
Following a successful deployment, Connector Creator makes data from external sources available for users to query and view in the Intelligence Portal.
This i2 Analyze Connector Creator guide 21-part video series provides details to help you create and understand a simple Connector Creator configuration file to bring data from a source database back to your Intelligence Portal.

important connector creatorIMPORTANT: It is recommended that you watch the videos in the sequence provided in order to properly learn all the details for creating a configuration file.

Time: 2 hours


i2 Analyze Connector Creator - Simple and complex schema types

This is the 16th video in a series which walks you through the build of your first i2 Analyze connector creator configuration file.

This video provides details for the mapping element when using simple and complex schema types.

To view the previous and the next video in this series, go to Additional Resources below for the links.

Duration

5 minutes


i2 Analyze Connector Creator - Deploying the new schema

This is the fifth video in a series which walks you through the build of your first i2 Analyze connector creator configuration file.

This video provides details on how to deploy the new schema.

To view the previous video in this series, go to Additional Resources below for the links.

Duration

7 minutes


How to resolve the deletion of merged property value definition views when upgrading from i2 Analyze version 4.2.1 to version 4.3.0
NEW

In this course, you will learn how to resolve the loss of the merged property value definitions when you upgrade from i2 Analyze v4.2.1 (Enterprise Insight Analysis (EIA) v2.2.1) to i2 Analyze v4.3.0 (EIA v2.3.0).

{GENERICO:type="hints",style="Important",text="This course is not relevant to you if you are not using merged property value definition views as part of your IBM i2 Analyze/IBM i2 Enterprise Insight Analysis deployment."}{GENERICO:type="hints_end"}

If you are defining how property values of merged records are calculated by using merged property value definition views in i2 Analyze version 4.2.1 (EIA 2.2.1), when you upgrade to i2 Analyze 4.3.0 (EIA 2.3.0) the views are replaced during the upgrade process.

To prevent the loss of the view definitions, you must manually back up any view definitions before you upgrade to version 4.3.0.

Duration: 15 minutes

i2 Analyze Connector Creator - Uploading/downloading the configuration file and troubleshooting

This is the 20th video in a series that walks you through the build of your first i2 Analyze connector creator configuration file.

This video provides details on downloading your current configuration file and uploading your new configuration file created in this series. The video also provides troubleshooting tips for your configuration file.

To view the previous and the next video in this series, go to Additional Resources below for the links.

Duration

7 minutes

i2 Analyze Connector Creator - The dataSource element

This is the ninth video in a series which walks you through the build of your first i2 Analyze connector creator configuration file.

This video provides details the datasource element.

To view the previous and the next video in this series, go to Additional Resources below for the links.

Duration

6 minutes

i2 Analyze Connector Creator - Defining simple properties

This is the 19th video in a series which walks you through the build of your first i2 Analyze connector creator configuration file.

This video provides details for defining the simple properties within the configuration file.

To view the previous and the next video in this series, go to Additional Resources below for the links.

Duration

5 minutes


i2 Analyze Connector Creator - Generate the mapping jar

This is the tenth video in a series which walks you through the build of your first i2 Analyze connector creator configuration file.

This video provides details for generating the jar file which contains the XML representation  you need to reference  in order to build the configuration file.

To view the previous and the next video in this series, go to Additional Resources below for the links.

Duration

8 minutes


i2 Analyze Connector Creator - Understanding properties

This is the 18th video in a series which walks you through the build of your first i2 Analyze connector creator configuration file.

This video provides details for the understanding the properties element This is dependent on whether your item within the schema is simple or complex.

To view the previous and the next video in this series, go to Additional Resources below for the links.

Duration

5 minutes


i2 Analyze Connector Creator - Build the configuration file

This is the 11th video in a series which walks you through the build of your first i2 Analyze connector creator configuration file.

This video provides details for building the configuration file.

To view the previous and the next video in this series, go to Additional Resources below for the links.

Duration

6 minutes


i2 Analyze Connector Creator - The mappings element

This is the 17th video in a series which walks you through the build of your first i2 Analyze connector creator configuration file.

This video provides details for the <mappings> element. In the Connector Creator configuration file, the <mappings> element determines how the data in query results turns into property values in i2 Analyze.

To view the previous and the next video in this series, go to Additional Resources below for the links.

Duration

5 minutes


i2 Analyze Connector Creator - The queries element

This is the 14th video in a series which walks you through the build of your first i2 Analyze connector creator configuration file.

This video provides details for defining the queries element.

To view the previous and the next video in this series, go to Additional Resources below for the links.

Duration

5 minutes

i2 Analyze Connector Creator - Security dimension values

This is the 12th video in a series which walks you through the build of your first i2 Analyze connector creator configuration file.

This video provides details for setting the security dimension values.

To view the previous and the next video in this series, go to Additional Resources below for the links.

Duration

7 minutes

i2 Analyze Connector Creator - The resources element

This is the 13th video in a series which walks you through the build of your first i2 Analyze connector creator configuration file.

This video provides details for defining the resources element.

To view the previous and the next video in this series, go to Additional Resources below for the links.

Duration

4 minutes

i2 Analyze Connector Creator - The specification element

This is the 15th video in a series which walks you through the build of your first i2 Analyze connector creator configuration file.

This video provides details for defining the specification element.

To view the previous and the next video in this series, go to Additional Resources below for the links.

Duration

3 minutes


i2 Analyst's Notebook v9 - Spell Checking

Objective

  • Understand how to detect and fix spell mistakes within chart item properties

Duration

7 minutes

i2 Analyst's Notebook v9 - Find Connecting Entities

Objective

  • Know how to reveal the network connections between entities

Duration

15 minutes

i2 Analyst's Notebook v9 - List Most Connected

Objective

  • Know how to reveal the network connections between entities

Duration

1:03 minutes

i2 Analyst's Notebook Premium v9 - Information Store Adhoc Importer Introduction

Objectives

Understand how the importer works with the Information Store

Duration

10 minutes

i2 Analyst's Notebook - Additional Cyber and Social Media Icons

Objectives

  • Know what additional cyber icons have been added to the Cyber Crime palette
  • Learn about the new social media palette

Duration

1 minutes

i2 Analyst's Notebook v9 - Ribbon and Quick Access Toolbar

Objective

  • Learn about the new quick access toolbar
  • Know how to make changes to the quick access toolbar
  • Understand what tasks are under each specific ribbon

Duration

2:17 minutes